50KV耐電壓試驗儀/橡膠擊穿電壓試驗機

50KV耐電壓試驗儀/橡膠擊穿電壓試驗機適用范圍：

   主要適用于固體絕緣材料（如：塑料、橡膠、層壓材料、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等絕緣材料及絕緣件）在工頻電壓或直流電壓下?lián)舸?qiáng)度和耐電壓的測試。

   由電腦控制，是我公司自主研發的全新第三代介電擊穿檢測儀器，電子控制系統是通過西門子PLC控制，數據采集方式通過光電隔離，有效解決試驗過程中的抗干擾問題，軟件操作使用方便，能夠?qū)崟r顯示動態曲線，同時升壓速率無級可調，可以根據自己的需要進行升壓速率調節，調節范圍在10V-5000V/S，處于*地位（國內*能達到此功能的廠家），使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據?？蓪?shí)時繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，打印試驗數據。

安全保護：
 本儀器具有比較完善的安全防護措施：
本試驗儀器電路保護控制：
九級安全防護措施： 備注:一般廠家為5級
(1) 超壓保護
(2)試驗過流保護 
(3)試驗短路保護
(4)安全門開啟保護
(5)軟件誤操作保護
(6)零電壓復位保護（避免一般廠家急停斷電不復位二次試驗繼續升壓的危險）
(7)試驗結束放電保護
(8)獨立保護接地
(9)試驗結束放電保護(zui為安全的樹脂式放電棒 有效的避免了一般廠家傳統的放電方式和電磁放電干擾放電殘留現象)

安全保護功能：
1、試驗在試驗箱中進行，試驗箱門打開時電源加不到高壓變壓器輸入端，即高壓側無電壓。100KV測試設備高壓電極距離試驗箱壁的zui近距離大于270mm，50KV測試設備高壓電極距離試驗箱壁的zui近距離大于250mm，試驗時即使人接觸箱壁也不會有危險。
2、設備要安裝單獨的保護地線。接保護地線，主要是減少試樣擊穿時對周圍產生的較強的電磁干擾。也可避免控制計算機失控。
3該試驗設備的電路設有多項保護措施，主要有：過流保護、過壓保護、漏電保護、短路保護、直流試驗放電報警，電磁放電等。
4、直流試驗放電報警功能:在設備做完直流試驗時,當開啟試驗門時設備會自動報警,直至使用設備上的放電裝置放電后報警會自動取消.(注：因?yàn)橹绷髟囼?yàn)后不放電會危險到人身安全,不能直接拿取電極,起到提醒使用人員放電以免造  身傷害)。
5、試驗放電裝置，電磁鐵自動放電放置。

試驗方式：
1、絕緣試樣空氣中擊穿或耐壓試驗
2、絕緣試樣浸油中擊穿或耐壓試驗
3、絕緣試樣空氣中階梯擊穿或耐壓試驗
4、絕緣試樣浸油中階梯擊穿或耐壓試驗
注：根據用戶要求，可定制其他試驗方式

產品參數：

1、設備輸入電壓： 交流 50KV (普通試驗室電源均可兼容)
2、試驗電壓方式： 交流 0--50 KV ;
                  直流 0--50 KV
3、電器容量：10KVA
4、試驗方法：0-50KV全量程可調

產品特點：

1、運行于WIN  XP/WIN7/WIN8系統下的獨立安裝軟件，界面友好，操作簡單

2、實驗顯示曲線，數據自動儲存，自動查找

3、多種用途可以進行交、直流試驗試驗準確、可靠、安全

4、計算機控制試驗過程，自動判斷停止，自動復位

5、超壓、過流、短路、漏電、誤操作等多種保護

相關產品
BDJC-50KV系類介電擊穿強度試驗儀/介電擊穿強度測試儀
BEST-121系類絕緣材料體積電阻率和表面電阻率測試儀
GDAT-C系類介電常數介質損耗測試儀
M-200系類塑料滑動摩擦磨損試驗機
BDH-20系類耐電弧測試儀/高電壓小電流試驗儀
BLD-600系類漏電起痕試驗儀/高壓漏電起痕試驗機
BRS-3系類水平垂直燃燒試驗儀/灼熱絲試驗儀/針焰試驗儀

電壓擊穿試驗儀（BDJC-50KV）

Scope of application:
Mainly used in solid insulating materials (such as: plastic, rubber, lamination material, film, resin, mica, ceramic, glass, insulating paint and other insulation materials and parts) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
Controlled by computer, is my company independent research and development of the all new 3rd generation dielectric breakdown testing instrument, electronic control system is controlled by Siemens PLC, data acquisition through a photoelectric isolation, effectively solve the problems of anti interference in the process of test, software is convenient to operate and use to real-time display dynamic curve, also boost speed stepless adjustable can according to their own needs of pressurization rate regulation, regulating range in 10V-5000V/S, in the domestic leading position (the only way to achieve the function of manufacturers), so that the pressure rate truly uniform and accurate, and can accuray measure the leakage current data. Can draw the test curve in real time, display the test data, judge accuray, and can save, analysis, print the test data.
safeguard：
The instrument has more perfect security measures:
Circuit protection and control of the test instrument:
Nine level security measures: Note: the general manufacturers for the 5
(1) overpressure protection
(2) test of over current protection
(3) test short circuit protection
(4) safety door opening protection
(5) software error protection
(6) zero voltage reset protection (to avoid failure of the general manufacturers to stop the power without reset two times test continued to boost the risk)
(7) the end of the discharge protection test
(8) independent protection of ground
(9) the end of the discharge protection test (special for the safety of the resin type discharge effectively avoid the traditional manufacturers of traditional discharge and electromagnetic discharge interference discharge residue phenomenon)
Safety protection function:
1, the test in the test chamber, the test box door open when the power supply is not added to the high voltage transformer input side, that is, the high voltage side no voltage. 100kV test equipment for high voltage electrode distance test chamber wall of the recent distance is more than 270, high-voltage test equipment of high voltage electrode distance test chamber wall of the recent distance greater than 250mm, test even people who come in contact with the wall of the box will not be in danger.
2, equipment to install a separate protective ground. The protective earth wire is mainly to reduce the strong electromagnetic interference generated by the breakdown of the sample. Can also avoid the control of computer control.
3 the circuit of the test equipment is equipped with a number of protective measures, including: over current protection, over voltage protection, leakage protection, short-circuit protection, DC test discharge alarm, electromagnetic discharge, etc..
4, DC discharge test alarm function: when we finish DC test equipment. When opening the door test equipment will automatically alarm until after using the device discharge discharge device alarm will automatically be cancelled. (Note: because the DC test on it would be dangerous to personal safety, can not be directly fetching electrode to caution the use of personnel discharge so as not to cause physical damage).
5, test discharge device, automatic discharge of the electromagnet.
Test methods
1, insulation test specimens in the air breakdown or pressure test
2, insulation breakdown or compressive specimen immersed in test
3, insulation test specimens in the air breakdown or pressure test
The 4 step, the insulation breakdown or compressive specimen immersed in test
Note: according to user requirements, other test methods can be customized
Product parameters:
1, equipment input voltage: AC 50KV (common test room power supply can be compatible)
2, test voltage mode: AC KV 0--50;
DC KV 0--50
3, electrical capacity: 10KVA
4, test method: 0-50KV full range adjustable
Product features
1, running in the XP/WIN7/WIN8 WIN system under the independent installation software, friendly interface, easy to operate
2, the experiment shows the curve, the data automatic storage, automatic search
3, a variety of uses can be carried out, DC test test is accurate, reliable and safe
4, computer control test process, automatic judgment stop, automatic reset
5, over voltage, over current, short circuit, leakage, wrong operation and other protection
Related products
BDJC-50KV series dielectric breakdown strength tester / dielectric breakdown strength tester
Volume resistivity and surface resistivity measuring instrument for BEST-121 series insulating material
GDAT-C series dielectric loss tester
M-200 series plastic sliding friction and wear testing machine
BDH-20 series arc tester / high voltage small current tester
BLD-600 series leakage trace tester / high pressure leak testing machine
BRS-3 series of horizontal and vertical burning tester / glow wire test instrument / needle flame test apparatus